T-slot framing, heat sinks, enclosures.
Functional extrusions for automation, tooling, and thermal management — modular T-slot profiles, finned heat-sink sections, and enclosure frames. Supplied in 6061-T6 or 6063-T5, cut, drilled, and tapped to your drawing.
What we extrude
T-slot framing
20, 30, 40, and 45 series modular profiles with 6, 8, and 10 mm slots.
Extruded heat sinks
Finned and pin sections for power electronics and LED thermal loads.
Enclosure & panel frames
Card guides, rack profiles, and cabinet framing with panel grooves.
Linear-motion & guard sections
Rail carriers, conveyor frames, and machine guarding profiles.
Where it goes
Automation & jigs
Work-cell framing, fixtures, and assembly benches.
Power & LED thermal
Inverter, driver, and luminaire heat dissipation.
Electronics enclosures
19-inch racks, instrument cases, and control cabinets.
Material handling
Conveyor structures, guarding, and safety fencing.
Alloy, temper, machining.
Sections can ship as mill lengths or fully machined — cut, drilled, tapped, and countersunk to your drawing.
| Parameter | Range | Standard |
|---|---|---|
| Alloy / temper | 6061-T6, 6063-T5 / T6 | ASTM B221 / EN 755 |
| T-slot series | 20 / 30 / 40 / 45 | Slot 6 / 8 / 10 mm |
| Wall / web thickness | 1.5 – 4.0 mm typical | Per die design |
| Heat-sink fin pitch | application-specific | Aspect-ratio limited |
| Machining | cut / drill / tap / CNC | To drawing |
| Finish | Mill / clear anodised / powder | RAL or swatch |
What to send us
For catalogue T-slot, the series and cut list is enough. For heat sinks or custom sections, send the profile and thermal or load target.
Profile or series
Catalogue series, or a DWG / DXF / STEP for custom sections.
Machining & cut list
Lengths, hole patterns, tapping, and quantities per part.
Duty target
Thermal dissipation or structural load the section must meet.
Quantity & destination port
Volume and the port for FOB / CIF pricing.