Curtain walls, windows, and façades.
Extruded sections for glazing and cladding systems — mullions, transoms, sashes, and pressure plates with integral glazing pockets, gasket races, and screw ports. Supplied in 6063-T5, mill-finish or anodised, cut to length.
What we extrude
Curtain-wall mullions & transoms
Stick and unitised systems with pressure plates and thermal breaks.
Window & door sections
Casement, sliding, and openable frames with gasket races and drainage.
Façade & cladding profiles
ACP sub-frames, louvres, sunshades, and coping sections.
Glazing beads & snap-fits
Trim, adaptors, and pressure caps to match the main sections.
Where it goes
Commercial glazing
Office towers, retail façades, and atrium systems.
Residential fenestration
Windows and doors for apartment and villa projects.
Ventilated façades
Rain-screen cladding sub-structures and cassette carriers.
Solar & canopy framing
Module frames, walkways, and entrance canopies.
Alloy, temper, tolerance.
Indicative ranges. Final tolerances follow the drawing and the governing standard (EN 12020 for precision architectural sections).
| Parameter | Range | Standard |
|---|---|---|
| Alloy / temper | 6063-T5 / T6, 6060-T6 | ASTM B221 / EN 755 |
| Wall thickness | 1.2 – 3.0 mm typical | Per die design |
| Circumscribing circle | up to ~250 mm | Press-dependent |
| Length | up to 6.5 m | Cut to order |
| Dimensional tolerance | EN 12020-2 (precision) | On request |
| Finish | Mill / anodised 10–25 µm / powder 60–120 µm | RAL or swatch |
What to send us
A drawing gets you an exact quote. No drawing? Describe the system and glazing thickness — we'll match a profile or develop a die.
Section drawing
DWG / DXF / STEP, or a dimensioned sketch of the cross-section.
Alloy, temper & finish
e.g. 6063-T5, anodised clear 15 µm — or the environment it faces.
Glazing / infill thickness
Glass or panel build-up the profile must accept.
Quantity & destination port
Estimated tonnage or lengths, and the port for FOB / CIF.